 |  |  |  |
Washington State Pedestrian and Bicycle Miles Traveled Project
Principal Investigator:
Krista Nordback, Portland State University
Summary:
Estimates of vehicle miles traveled (VMT) drive policy and planning decisions for surface transportation. No similar metric is computed for cycling and walking. What approaches could be used to compute such a metric on the state level? This report discusses three such approaches, identifies the advantages and disadvantages of each, and applies them to Washington State. The first approach employs t...
Estimates of vehicle miles traveled (VMT) drive policy and planning decisions for surface transportation. No similar metric is computed for cycling and walking. What approaches could be used to compute such a metric on the state level? This report discusses three such approaches, identifies the advantages and disadvantages of each, and applies them to Washington State. The first approach employs travel survey data. The second approach is sample-based using pedestrian and bicycle count data. The third approach is an aggregate demand model approach using demographic data combined with count data. Due to data limitations, none of these methods could be properly implemented on the statewide level. Despite the data limits, the methods were implemented for one county (King County) in order to compare findings. The travel survey method estimated the lowest bicycle and pedestrian miles traveled (BMT and PMT), and the sample-based method estimated the highest. The travel survey method is useful for a statewide measure, but it does not provide the detail needed for facility-level estimates. For bicyclists, the sample-based method is appropriate if volumes are desired at the facility level. For pedestrians, the aggregate model might be more appropriate, because of the more dispersed nature of pedestrian travel. Each method has strengths and weaknesses, and each helps us understand bicycle and pedestrian travel in different ways. For this reason, the project team recommends improving both statewide travel survey data and pedestrian and cyclist traffic count data which feed these methods. Travel survey data should be collected statewide with oversampling for non-motorized travelers. Pedestrian and cyclist traffic counts should be expanded to include a continuous counting program in addition to the short-duration count program. After the continuous count program is in place, short-duration counts should be chosen using a stratified random sampling approach. For example, the sampling frame could consist of all road and path segments in the state divided by region (Coast Range, Puget Lowland, Cascades, Eastern Washington), by urbanity (rural, urban), by facility type (highways/arterials, local/collector roads, paths), and by whether the location is on a bridge or not. To increase sites sampled, the short-duration count program could also be rotated, with each location being counted every three years instead of every year. Better data will allow the state to quantify bicycling and walking at both the state level and facility level to inform decision-making, facility design and planning, and safety analysis.
See More
Project Details
| Project Type: | Research |
|---|---|
| Project Status: | Completed |
| End Date: | June 30, 2015 |
| UTC Funding: | $44,428 |
Downloadable Products
- NITC_708_Washington State Pedestrian and Bicycle Miles Traveled Project (FINAL_REPORT)
- Making Every Mode Count (PROJECT_BRIEF)
Other Products
- (PUBLICATION)
- Estimating Pedestrian and Bicycle Miles Traveled (PMT/BMT) in Washington State (PRESENTATION)
- Estimating Walking and Cycling At the State Level (PRESENTATION)
- Estimating BMT and PMT in Washington (PRESENTATION)
- Estimating Pedestrian and Bicycle Miles Traveled (PMT/BMT) in Washington State (PRESENTATION)
- Best Practices for Collecting Counts and Risk Evaluation for Bicyclists and Pedestrians (PRESENTATION)
- Estimating BMT and PMT in Washington (PRESENTATION)